Voxelane Start a project

Construction

Tower crane simulator training

A tower crane modelled to its load chart and set on a site like yours. Operators work blind lifts, wind and tight slews with a dogman on the radio, and every lift is scored.

Built as
Simulator · Motion · VR · Team VR
Around
Your site and crews
Starts with
A pilot
The view from a tower crane cab: the operator's hands on the joysticks and a load on the hook above a building site

What is tower crane simulator training?

Tower crane simulator training lets an operator run a virtual tower crane, modelled to its real load chart and controls, from a replica cab, a motion platform or a VR headset. They practise the lifts that cause incidents, such as blind picks, wind gusts and loads near the limit, and each lift is scored for sway, speed and safety.

A tower crane operator spends much of the day lifting loads they can't see, on instruction from a dogman over the radio. The skills that matter most are the hardest to practise on a live site.

In the simulator the instructor controls the site, the structure and the weather. A gust can arrive mid-lift or a radio call can be wrong, and the operator learns to stop before the load does something they can't take back.

Scenarios we can build

Examples only. We rebuild each one around your site, equipment and procedures.

Blind lift on radio calls

The load drops out of sight behind the structure. The operator works only on the dogman's calls.

Wind rising through the shift

Gusts build while the load is in the air. The operator must read the conditions, judge the limit and land the load.

Load path over a work area

The planned path crosses people at work. The operator must hold or re-route until the area is clear.

What we can measure

Every session can be scored against your own checklist and exported to your LMS or as PDF.

Built for

  • Tower crane operators
  • Trainee operators
  • Dogmen and riggers
  • Lift supervisors

Rules and standards

In Australia, operating a tower crane is high risk work that needs a CT licence. Simulator sessions build skill and confidence before and between real crane hours. They don't replace the licence assessment, and we can map each module to the competencies your assessors use.

  • Load sway and peak swingHow smoothly each movement starts and stops.
  • Time with the load over peopleEvery second spent above a worker or exclusion zone.
  • Calls followed and missedEach radio instruction against what the crane actually did.

Scope your build

A first call about what your people face, then an outline of the scenarios, the format and the scoring we would build.

Start a project
Next in ConstructionMobile & crawler crane →

Frequently asked questions

What is tower crane simulator training?

Tower crane simulator training lets an operator run a virtual tower crane, modelled to its real load chart and controls, from a replica cab, a motion platform or a VR headset. They practise the lifts that cause incidents, such as blind picks, wind gusts and loads near the limit, and each lift is scored for sway, speed and safety.

Does simulator time count toward a CT licence?

The licence is assessed on a real crane by an accredited assessor. Simulator time prepares operators for that assessment and keeps skills current, and the session records can support your own competency evidence.

Can you model our crane and site?

Yes. We set the crane's load chart, jib length and controls to match yours, and rebuild the site around it from drawings or a drone survey.

Can a dogman train at the same time?

Yes. A dogman in a VR headset gives the radio calls from the ground while the operator works from the cab.