Voxelane Start a project

Property & real estate

Digital twins for building operations

Your building as a live 3D model, linked to the building management system, sensors and cameras. Facility teams see the fault, the room and the history before anyone climbs to the plant room.

Built as
Digital twin · Web
Around
Your site and crews
Starts with
A pilot
A facility manager views a 3D model of an office tower with sensor markers and small graphs on a monitor

What is a building digital twin?

A building digital twin is a 3D model of a building connected to its live data: the building management system, energy meters, occupancy and environmental sensors, and cameras. Facility teams see alarms, energy use and maintenance history in place, by floor and room, and plan work without walking the building first.

Most building data sits in separate systems that only make sense to the person who set them up. A twin puts it on the floor plan, where everyone can read it.

That means fewer site visits for diagnosis, faster contractor briefings and one record of what is installed where.

Scenarios we can build

Examples only. We rebuild each one around your site, equipment and procedures.

Fault to location

A BMS alarm opens the twin at the exact unit and shows its service history.

Energy by floor

See which floors and which plant use the most energy, and when.

Contractor briefing

Send a contractor a link to the exact plant room, access route and isolation points.

What we can measure

Every session can be scored against your own checklist and exported to your LMS or as PDF.

Built for

  • Facility managers
  • Asset owners
  • Building engineers
  • Maintenance contractors

Rules and standards

We connect to the systems you already have through their supported interfaces, such as BACnet, Modbus or vendor APIs, and agree what data the twin can read before anything is connected.

  • Alarms and response timesFrom alarm to acknowledgement to fix.
  • Energy and occupancyUse by floor, zone and time of day.
  • Site visits avoidedDiagnoses and briefings done from the twin.

Scope your build

A first call about what your people face, then an outline of the scenarios, the format and the scoring we would build.

Start a project
Next in Property & real estateRemote property inspections →

Frequently asked questions

What is a building digital twin?

A building digital twin is a 3D model of a building connected to its live data: the building management system, energy meters, occupancy and environmental sensors, and cameras. Facility teams see alarms, energy use and maintenance history in place, by floor and room, and plan work without walking the building first.

Do we need new sensors?

Not always. We start with the BMS and meters you have, then add sensors or cameras where there are gaps.

Is the data secure?

Access is role-based, and the twin only reads the data you agree to share. Hosting can stay in Australia.

Can it cover several buildings?

Yes. A portfolio view shows each building, with a twin of each one behind it.