Voxelane Start a project

Mining & resources

Underground loader and remote operation training

Loaders, tele-remote bogging and continuous miners in a model of your drives. Operators practise tight tramming, the draw point and staying out of the machine's red zone.

Built as
Simulator · Desktop · VR
Around
Your site and crews
Starts with
A pilot
An underground loader drives through a mine tunnel with its headlights on

What is underground equipment simulator training?

Underground equipment simulator training gives operators the controls of a virtual loader, tele-remote station or continuous miner in a model of their own drives. They practise tramming in tight drives, loading at the draw point and staying clear of red zones, and every contact, near-miss and cycle time is recorded.

Underground machines work inches from the walls and close to people. A new operator's first hours are slow, and an error costs a machine, a rib or worse.

In the simulator those first hours happen before the machine is at risk. Operators learn the controls, the sight lines and the red zones, then go underground already competent at the basics.

Scenarios we can build

Examples only. We rebuild each one around your site, equipment and procedures.

Tramming in a narrow drive

Move a loaded machine through tight bends while a pedestrian appears in a stub.

Tele-remote at the draw point

Load from the stope by camera, judging the brow and keeping the bucket out of trouble.

Continuous miner red zone

Cut and tram from the remote while staying clear of the machine's danger area.

What we can measure

Every session can be scored against your own checklist and exported to your LMS or as PDF.

Built for

  • Loader operators
  • Tele-remote operators
  • Continuous miner operators
  • Trainee operators

Rules and standards

We set the machines to the controls and dimensions of your fleet and build the drives from your mine plans, so the clearances in the simulator are the clearances underground.

  • Wall contacts and near-missesEvery contact with the rib and every close pass by a person.
  • Cycle timeLoad, tram and dump times compared with your targets.
  • Red zone entriesTime the operator spent inside a machine's danger zone.

Scope your build

A first call about what your people face, then an outline of the scenarios, the format and the scoring we would build.

Start a project
Next in Mining & resourcesHaul trucks & surface mining →

Frequently asked questions

What is underground equipment simulator training?

Underground equipment simulator training gives operators the controls of a virtual loader, tele-remote station or continuous miner in a model of their own drives. They practise tramming in tight drives, loading at the draw point and staying clear of red zones, and every contact, near-miss and cycle time is recorded.

Can we use our own remote control unit?

Yes. We can fit a replica of your tele-remote station or miner remote so the controls match.

Which machines can you model?

Underground loaders, trucks, jumbos and continuous miners, set to your fleet's controls and dimensions.

Does it suit refresher training?

Yes. Short sessions on the hardest manoeuvres keep experienced operators sharp between shifts.